Full range of Anderson Battery Connector manufacturer in China

Advantage of Anderson Battery Connector

Let’s imagine what would happen if there were no charging plug and power connector? At this time, the circuits shall be permanently connected with continuous conductors. For example, if the electronic device is to be connected to the power supply, both ends of the connecting wire must be firmly connected with the electronic device and the power supply by some means (such as welding).

As a result, it brings a lot of inconvenience to production and use. Take the automobile battery as an example. Assuming that the battery cable is fixed and welded firmly on the battery, the automobile manufacturer will increase the workload, production time and cost for installing the battery. When the battery is damaged and needs to be replaced, the car should also be sent to the maintenance station. The old one should be removed by desoldering, and then the new one should be welded. Therefore, more labor costs should be paid. Having a charging plug can save you a lot of trouble. Just buy a new battery from the store, disconnect the charging plug, remove the old battery, install a new battery, and reconnect the charging plug. This simple example illustrates the benefits of a charging plug. It makes the design and production process more flexible and convenient, and reduces the production and maintenance costs.

Benefits of Anderson connector charging plug:

1. Improve design flexibility

The use of charging plugs gives engineers greater flexibility in the design and integration of new products, as well as in the composition of systems with components.

2. Improve production process

The charging plug simplifies the assembly process of electronic products. It also simplifies the mass production process;

3. Easy upgrade

With the progress of technology, the components can be updated when the charging plug is installed, and the new and more perfect components can replace the old ones;

4. Easy maintenance

If an electronic component fails, it can be quickly replaced when the power charging plug is installed

Anderson connector charging plug is not the plug we usually use. It is a kind of vehicle plug, which is specially used in vehicles. The vehicles that can be used include electric vehicles, sightseeing vehicles, forklifts, golf carts, and even mechanical equipment such as vacuum cleaners, lawn mowers, and electric wheelchairs. What are the types and features of the Anderson plug? How should we install, pin and tie the Anderson plug when using it?

Anderson plug product category: single pole connector, high current capacity, small size, free assembly, AC and DC dual-use; Multipole connector, positive and negative design, two hole plug-in, silver plated terminal design, supporting handle; Three pole connector, suitable for three intersecting / DC product connection; Two pole connector with contact, two pole main contact + two pole auxiliary contact; It is suitable for battery energization and can monitor battery temperature rise.

Main features: the shell is made of polycarbonate, which is resistant to high temperature and corrosion; Adopt eye-catching color coding, with different colors and different connector interfaces to prevent misinsertion; The hardware terminal is red copper silver plated, with excellent conductivity; The hardware spring piece is provided with a positioning slot, which can prevent the terminal from moving left and right to ensure good contact; The connector is not divided into male and female design, which is conducive to reducing inventory; Accessories, handle + dust cover; Connector fire rating.

When inserting the pin connection of the Anderson plug into the socket of the connector, be sure to observe whether the latch is buckled. When repairing the waterproof connector, pay special attention not to allow oil and water to enter the socket, otherwise, it must be cleaned and dried before reconnecting. Anderson plug instruction manual is described below.

Use manual for correct method of pin and correct use of circuit detection instruments and meters: when using various circuit detection instruments, first understand their working principle and operating conditions, and prohibit unreasonable use; When measuring voltage and current, appropriate measuring range shall be selected to avoid damaging the instrument; It is forbidden to measure voltage at current and resistance level; Before measurement, please confirm whether the testing instrument you use is normal.

Properly bind the harness and wires: keep away from moving parts as far as possible to prevent breakage and wear; Avoid hard bending and bending of the harness; Avoid friction with sharp metal edges and corners; Keep away from oil and water as far as possible; Keep away from high current connector temperature parts (such as engine body) as far as possible.